4
5 Installation and Connections
Installation
Never install this unit in any of the following situations, as it could result in damage:
Places where the installation surface is unstable or not level.
Places with excessive electrical noise.
Places with excessive humidity or dust.
Places with poor ventilation, because the CAMM SCRIBE generates considerable heat during operation.
Places with excessive vibration.
Places exposed to strong illumination or direct sunlight.
When arranging setup space for the CAMM SCRIBE, make sure you have a space that is at least 800 mm (32") wide, 800 mm (32")
in depth, and 600 mm (24") in height.
Connections
• Always make sure that the power is off on both the computer and the CAMM SCRIBE whenever any cables are connected or
disconnected.
• Securely connect the power cord, computer I/O cable and so on so that they will not be unplugged and cause failure during
operation.
• Cables are available separately. One which you are sure matches the model of computer being used should be selected.
Serial (RS-232C) cable
(sold separately)
Screw
Parallel cable
(sold separately)
Lock-use pin
Use either a parallel
cable or serial cable
to connect.
Power cord
Screw
Printer connector
on the computer
Rear View
Screw
Summary of Contents for CAMM SCRIBE CS-20
Page 26: ...18 Appendix C Specifications...
Page 28: ...R8 001101 CS 20...
