Roland CAMM SCRIBE CS-20, User Manual

Page: 8 / 28

vi vi
To Ensure Correct Use
This product is a precision instrument
and must be handled with care. Do not install in an area subject to dust,
high humidity or poor ventilation. Do not connect to an AC outlet that
supplies other than the specified voltage.
When the unit is not in use for an
extended period, detach the electrical
plug from the AC outlet. When cleaning the CAMM SCRIBE,
make sure that the main unit's power
OFF. Always allow a minimum gap of 30 cm
(12") on the side where the vacuum
hose exits.
30 cm (12")
or more
Removing the Safe-transport Retainers
Retainers are attached at the locations shown below to ensure safety when transporting this product.
Use the hexagonal wrench included with the unit to remove the retainers before use. (Once removed, the retainers should be
stored in a safe place because they are needed again when repacking the product.)
Hexagonal
wrench