5
SET ORIGIN
VIEW
TEST
Driver Software Installation
Interface Setup
1
2
4
3
Switch on the CAMM SCRIBE's power switch.
(The
PAUSE
LED flashes at this time.)
Press the
PAUSE/VIEW
key.
This product includes driver software for Windows.
This driver must be installed if you are using Windows.
Refer to the explanation included with the driver to install it.
The tool carriage moves to the left rear.
Communication parameters for a serial connection
The tool carriage stops when it reaches the VIEW
position (inner right-hand side).
To ensure safety, operation of the CAMM SCRIBE is paused when the power is switched on.
Press the
PAUSE/VIEW
key to end the paused state.
Powerup
CAMM SCRIBE automatically detects the type of interface (parallel or serial) from the first batch of data sent from the
computer after the power is switched on.
When using a serial connection for the interface, however, the communication parameters on the computer should be set
as follows.
The communication parameters for the CAMM SCRIBE are locked in and cannot be changed.
The CAMM SCRIBE is now ready to receive data.
Summary of Contents for CAMM SCRIBE CS-20
Page 26: ...18 Appendix C Specifications...
Page 28: ...R8 001101 CS 20...
