Roland BK-5 Owner'S Manual Download

Page: 21 / 152

Demo of the BK-5

Backing Keyboard BK-5

Demo of the BK-5

Your BK-5 contains a demo that introduces all of its
highlights. It might be a good idea to try it out now. The
demo is self-explanatory, so we’ll just show you how to
start and stop it.

NOTE

You will need to connect an external display to take advantage
of the BK-5’s demo function. See “Connecting a television set”
on p. 18.

Simultaneously press the [MENU] and [EXIT]
buttons.

The BK-5 plays back a song and the external display
introduces the BK-5’s features.

Press the [EXIT] button to leave the demo
function.

NOTE

No data for the music that is played back will be output
from MIDI OUT.

NOTE

All rights reserved. Unauthorized use of this material for
purposes other than private, personal enjoyment is a viola-
tion of applicable laws.

BK-5_US.book Page 21 Monday, November 14, 2011 12:43 PM

Summary of Contents for BK-5

























































































































































Search results

Summary of Contents for BK-5

Reviews:

Related manuals for BK-5

Brands by name

Popular brands

Roland BK-5, Owner'S Manual

Search results

Summary of Contents for BK-5

Reviews:

Related manuals for BK-5

Brands by name

Popular brands