Roland BK-5 Owner'S Manual Download

Page: 112 / 152

Menu options

112

Backing Keyboard BK-5

■

The following folders are created on the USB
memory

NOTE

We recommend copying the contents of your USB memory
to your computer before formatting it.

Name

Value

My Performances This folder is used to save Perfor-

mance Lists. (The contents of this
folder cannot be viewed by pressing
the [USB MEMORY] button. You need
to press the PERFORMANCE [LIST]
button gain access to the files it con-
tains. The contents can be viewed on
a computer, however.)

My Recordings

This folder is used to store your audio
recordings (see p. 52).

My Songs

This folder can be used to save SMF
songs you edited with the “Makeup
Tools” functions (see p. 74).

My Rhythms

This folder can be used to save
rhythms you edited with the “Makeup
Tools” or “Rhythm Composer” func-
tions (see p. 74).

BK-5_US.book Page 112 Monday, November 14, 2011 12:43 PM

Summary of Contents for BK-5

























































































































































Search results

Summary of Contents for BK-5

Reviews:

Related manuals for BK-5

Brands by name

Popular brands

Roland BK-5, Owner'S Manual

Search results

Summary of Contents for BK-5

Reviews:

Related manuals for BK-5

Brands by name

Popular brands