Roland BK-5, Owner'S Manual

Page: 90 / 152

Menu options
90
r
Backing Keyboard BK-5
Press the [WRITE] button (its indicator flashes) to
confirm your settings and edit the data.
■
Delete
Unlike the “Erase” function, “Delete” not only erases
the data but also the measures, beats and/or CPT
units, so that all data that lie behind the “To” position
are shifted towards the beginning of the track(s). You
cannot choose the data type to be erased.
Press the [WRITE] button (its indicator flashes) to
confirm your settings and edit the data.
To Bar 1~[last mea-
sure of the
track or pat-
tern] This is where you spec-
ify the last measure to
be edited. By default,
the “To” position is set
to the last event of the
selected track (or the
last event of the long-
est track when you
select “All”).
To Beat 1~[number of
beats per bar] Specifies the beat posi-
tion. The number of
selectable beats
depends on the
selected time signa-
ture.
To CPT 0~119 Refers to the last clock
that should be affected
by the edit operation.
Change this setting
only if your edit opera-
tion should not end
exactly on the selected
beat.
Data Type
(select the data
to be edited) ALL All parameters listed
below.
Note Only note messages.
Modulation CC01 messages usu-
ally used for adding
vibrato (i.e. use of the
BENDER/MODULA-
TION lever).
PanPot CC10 messages that
specify the stereo posi-
tion.
Expression CC11 messages that
are used for tempo-
rary volume changes.
Reverb Reverb Send messages
(how strongly the part
should be processed by
the reverb effect).
Chorus Chorus Send messages
(how strongly the part
should be processed by
the chorus effect).
Program
Change Program change mes-
sages, used to select
sounds or Drum Sets.
Note: by deleting pro-
gram change messages
you also dispose of the
related CC00 and CC32
(bank select) messages.
P.Bender: Pitch Bend data (i.e.
use of the BENDER/
MODULATION lever).
Parameter Setting Explanation
From Note 0 C-~127 G9 This parameter is only
displayed if “Data
Type” (see above) is set
to “Note”. It allows you
to set the note (or
lower limit of the note
range) to be modified
within the specified
“From/To” time range.
To Note 0 C-~127 G9 This parameter allows
you to set the upper
limit of the note range
to be modified within
the specified “From/To”
time range.
Parameter Setting Explanation
Track ADrums~Acc6,
ALL Allows you to select
the track you wish to
edit. Select “ALL” to
edit all tracks.
Mode Major, Minor,
7th Allows you to select
the Mode to be edited.
Division Intro 1~4,
Main 1~4, Fill
Dwn 1~3, Fill
Up 1~3, End
1~4 Use this parameter to
select the Division you
want to edit.
From Bar~
To CPT See page 88.
Parameter Setting Explanation
BK-5_US.book Page 90 Monday, November 14, 2011 12:43 PM