manualshive.com logo in svg

Roland BK-5, Owner'S Manual, Page: 15 / 152

Share
Download
Roland BK-5 Owner'S Manual Download Page 15

Shortcut list

Backing Keyboard BK-5 

r

15

4.

Shortcut list

Pressing and holding the following buttons (or button combinations) allows you to directly jump to a related parameter 
page, which is faster than selecting the page in question via the BK-5’s menu. Some of these buttons activate a lock func-
tion (page 54).

Press and hold

Function

RHYTHM FAMILY buttons

Locks the rhythm to keep it from changing when you select another Per-
formance memory.

Locks the tempo setting to keep it from changing when you select 
another Performance memory.

After activating record standby mode (the indicator flashes), pressing and 
holding this button will cancel that mode (use it if you don’t want to 
record after all).

Locks the key setting to keep it from changing when you select another 
Performance memory.

Opens the “Rhythm Track Mute” or “Song Track Mute” page.

Opens the display page that shows which Tone is currently selected for 
the Lower part.

Opens the display page that shows which Tone is currently selected for 
the Upper2 part.

Simultaneously pressing the [LWR] and [UP2] buttons (without holding 
them) opens the display page where you can set the volume of the 
Upper1, Upper2 and Lower parts.

Opens the “One Touch Edit” page.

Opens the “Melody Intelligence” page.

In some cases, this opens the “Help” page.

TONE buttons

Locks the Tone to keep it from changing when you select another Perfor-
mance memory.

Opens the “Split” page.

Pressing and holding this button takes you back to the main page, no 
matter where you currently are.

BK-5_US.book  Page 15  Monday, November 14, 2011  12:43 PM

Summary of Contents for BK-5

























































































































































Reviews:

No comments