Roland 5100011346 -01 Owner'S Manual Download Page 54

Page: 54 / 120

Using the SD-50 as a MIDI Sound Module

You can save the studio set you’ve edited. This means that the sounds you’ve selected for the SD-50’s parts, as well as
other settings, will be saved in internal memory. You can save three different studio sets in internal memory.

Edit the studio set as desired.

Make settings as described in “Selecting a Tone For Each Part” (p. 46), “A djusting the Settings of Each Part” (p. 49),
and “Adjusting the Effect Settings” (p. 52)

Press the [FAVORITE] button for a number of seconds until the REGIST SONG screen appears.

page_regist_favorite.eps

Press the [FAVORITE] button a number of times to access the REGIST STUDIO SET screen.

page_studio_write.eps

Press one of the [PART](1) – [PLAYER](3) buttons.

Once the following screen appears, the studio set has been saved.

page_studioset_write.eps

Press the [FAVORITE] button a number of times to access the screen shown below.

The saved studio sets will be displayed, and the LEDs for the [PART](1) – [PLAYER](3) buttons will blink.

page_patch_grp_select.eps

Press one of the [PART](1) – [PLAYER](3) buttons.

The studio set will be recalled.

Saving a Studio Set

Recalling a Studio Set

SD-50_e.book 54 ページ２０１０年１月２５日　月曜日　午前１０時５２分

Summary of Contents for 5100011346 -01

























































































































Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands

Roland 5100011346 -01, Owner'S Manual

Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands