Roland 5100011346 -01 Owner'S Manual Download Page 12

Page: 12 / 120

Check the Contents of the Package

When you open the package, check that all items are present. If anything is missing, please contact your dealer.

❏

SD-50 (main unit)

❏

SD-50 Owner’s Manual (the document you’re reading)

This explains how to use the SD-50, and includes cautions and other notes. Keep it at hand for reference.

❏

Software Disc (DVD-ROM)

This disc contains the following.

• SONAR LE (music production application software)

• Playlist Editor (application software for managing songs)

• SD-50 driver

* Do not touch the data surface (unprinted surface) of the disc. Doing so might make the data unreadable.

If the disc gets dirty, clean it using a commercially available disc cleaner.

❏

AC adaptor (with power cord)

This is a dedicated AC adaptor for the SD-50. You must use only the supplied adaptor.

❏

USB cable

This cable connects the SD-50 to your computer’s USB connector.

* Please use the included USB cable. If you need a replacement because the included USB cable becomes damaged, please contact

one of the service locations listed at the back of this manual.

SD-50_e.book 12 ページ２０１０年１月２５日　月曜日　午前１０時５２分

Summary of Contents for 5100011346 -01

























































































































Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands

Roland 5100011346 -01, Owner'S Manual

Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands