Roland 5100011346 -01 Owner'S Manual Download Page 30

Page: 30 / 120

Installing the Driver

12.

If the “Hardware Installation” dialog box appears, click [Continue Anyway] to continue the
installation.

fig.xpdrv7-e.eps

If you are unable to proceed, click [OK] in the dialog box to terminate the installation. Then change the setting as
described in “Driver Signing Option Settings (Windows XP)” (p. 99), and perform the installation once again.

13.

The screen will indicate “Completing the Found New Hardware Wizard.” Click [Finish].

When installation is complete, the “SD-50 Driver Setup” dialog box will indicate “Installation has been completed.”

14.

Click [Close] to close the “SD-50 Driver Setup” dialog box.

If the “System Settings Change” dialog box appears, click [Yes] to restart Windows.

SD-50_e.book 30 ページ２０１０年１月２５日　月曜日　午前１０時５２分

Summary of Contents for 5100011346 -01

























































































































Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands

Roland 5100011346 -01, Owner'S Manual

Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands