Roland 5100011346 -01 Owner'S Manual Download Page 49

Page: 49 / 120

Using the SD-50 as a MIDI Sound Module

For each part, you can adjust its volume and other settings, and apply effects to the sound.

You can “mute” a specific part so that it will not produce sound.

Conversely, you can “solo” a specific part so that it will play while all of the other parts are muted.

Press the [PART] button a number of times to access the MIDI part screen.

page_part_meter.eps

Turn the [VALUE] dial to select the part that you want to mute or solo, and then press the [ENTER]
button.

page_part_meter-1.eps

Turn the [VALUE] dial to change the setting.

page_part_meter-s.eps

The mute and solo settings will be saved in internal memory if you save the studio set (p. 54).

Adjusting the Settings of Each Part

Muting/Soloing a Part

Setting

Explanation

Muted

Soloed

SD-50_e.book 49 ページ２０１０年１月２５日　月曜日　午前１０時５２分

Summary of Contents for 5100011346 -01

























































































































Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands

Roland 5100011346 -01, Owner'S Manual

Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands