Roland 5100011346 -01, Owner'S Manual

Page: 66 / 120

66
Using the SD-50 as an SMF/Audio Player
Adjusting the volume of the song
1.
In the play screen, turn the [VALUE] dial.
The screen will appear as follows, you can change the volume.
You can also adjust the song volume from the audio part screen (p. 59).
page_song_playe-volumer.eps
Chain Play / Repeat All settings
You can use Chain Play for the songs in the playlist, or play all songs repeatedly.
* This screen will not appear if is shown at the left of the playlist name.
1.
Press the [PLAYER] button a number of times to access the play mode screen.
page_song_mode-1.eps
2.
Turn the [VALUE] dial to specify how the song is to play, and then press the [ENTER] button.
page_song_level_edit.eps
3.
Turn the [VALUE] dial to turn the play mode setting on or off.
If you decide to cancel, press the [EXIT] button.
4.
Press the [ENTER] button.
The play mode setting will be stored.
Play mode Values Explanation
Chain Play ON, OFF
The songs in the playlist will play consecutively. When the last song finishes playing, playback
will stop.
Repeat All ON, OFF
The songs in the playlist will play consecutively, and when the last song finishes playing,
playback will return to the first song and continue playing consecutively.
If the following screen appears
If you attempt to exit play mode without saving the play mode
settings, the screen shown at right will appear.
If you want to execute the changes you made in play mode, press the
[ENTER] button. If you want to cancel them, press the [EXIT] button.
SD-50_e.book 66 ページ ２０１０年１月２５日 月曜日 午前１０時５２分