Roland 5100011346 -01 Owner'S Manual Download Page 72

Page: 72 / 120

System Settings

Here you can make “system” settings that apply to the overall operation of the SD-50, such as the tuning and the
brightness of the display.

Press the [MENU] button.

The menu screen will appear.

menu-1.eps

Turn the [VALUE] dial to select the parameter that you want to edit, and then press the [ENTER]
button.

The value of the selected parameter will be highlighted.

menu-2.eps

Turn the [VALUE] dial to edit the value, and then press the [ENTER] button.

When you’ve finished making settings, press the [MENU] button.

The following message will appear.

fig.screen.eps

If you decide to cancel, press [EXIT].

If you decide to execute, press the [ENTER] button.

When the settings have been written, the following screen will appear, and then you’ll return to the menu screen.

menu-3.eps

Basic Procedure for System Settings

SD-50_e.book 72 ページ２０１０年１月２５日　月曜日　午前１０時５２分

Summary of Contents for 5100011346 -01

























































































































Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands

Roland 5100011346 -01, Owner'S Manual

Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands