Roland 5100011346 -01 Owner'S Manual Download Page 51

Page: 51 / 120

Using the SD-50 as a MIDI Sound Module

You can specify the pan (stereo position) of each part, and adjust the depth of the reverb and chorus effects for each
part.

Press the [PART] button a number of times to access the Part Edit screen.

page_part_edit-1.eps

Turn the [VALUE] dial to select the effect whose settings you want to adjust, and then press the

[ENTER] button.

page_part_edit-3.eps

Turn the [VALUE] dial to adjust the setting.

The pan and effect settings you specify will be saved in internal memory if you save the studio set (p. 54).

Adjusting the Pan and Effect Depth

Setting

Value

Explanation

Pan

0–127

Left/right balance of the sound.

Reverb Send

0–127

Depth of reverb. Choose “0” if you don’t want to apply reverb.

Chorus Send

0–127

Depth of chorus. Choose “0” if you don’t want to apply chorus.

SD-50_e.book 51 ページ２０１０年１月２５日　月曜日　午前１０時５２分

Summary of Contents for 5100011346 -01

























































































































Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands

Roland 5100011346 -01, Owner'S Manual

Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands