Roland 5100011346 -01, Owner'S Manual

Page: 107 / 120

107
Solo Tone
Features of the Solo sounds
*1: This effect will be obtained if control change (CC82) is ON. If this is OFF, the normal pitch bend effect will occur.
(CC82: 0–63 = OFF, 64–127 = ON)
Sound Features
Violin
• If you play two or more notes simultaneously, a chord will sound, simulating the double-stop playing technique of a violin.
When all notes turn off, the instrument will return to mono mode.
* Vibrato will not automatically be applied below the lowest note that a violin can sound (note number 55). This simulates the
resonance of the open strings.
Trombone
• Playing legato with the portamento switch ON will produce the glissando effect that is typical of a trombone.
• Moving the bender up will produce the discontinuous pitch change that is distinctive of brass instruments. (*1)
• Moving the bender down will produce a “fall” effect. (*1)
Shakuhachi
• The distinctive breath noise of the shakuhachi is simulated.
• Play strongly (note-on velocity 115) to produce the effect of allowing a large amount of breath to be heard in the sound.
• When you play legato, notes will be connected as if they were played with a single breath. While playing legato, play strongly
(note-on velocity 115) to simulate a grace note characteristic of a shakuhachi.
SD-50_e.book 107 ページ ２０１０年１月２５日 月曜日 午前１０時５２分