Rohde & Schwarz R&S NGL200 Series User Manual Download

Page: 92 / 201

Instrument Functions

R&S

NGL200/NGM200

User Manual 1178.8736.02 ─ 09

2. Enter the required value.

3. Confirm value with the enter key

6.17

General Instrument Settings

The following chapters provide the general instrument information and utilities services
in "Device" menu.

1. Press [Settings] key.

The R&S

NGL/NGM displays the device/channel menu window.

2. Select the "Device" tab.

The R&S

NGL/NGM displays the device menu.

6.17.1

Licenses Management

Options are enabled by entering a registered license key code.

You may choose to install from an XML file on USB or by manually entering the key
code.

► Select "Licenses" to install license key code.

The R&S

NGL/NGM displays the license dialog.

● "Active": Options that are currently active in the instrument
● "Inactive": Options that are currently not active in the instrument
● "Deactivation": Options that are expried or removed in the instrument

General Instrument Settings

Summary of Contents for R&S NGL200 Series










































































































































































































Search results

Summary of Contents for R&S NGL200 Series

Reviews:

Related manuals for R&S NGL200 Series

Brands by name

Popular brands

Rohde & Schwarz R&S NGL200 Series, User Manual

Search results

Summary of Contents for R&S NGL200 Series

Reviews:

Related manuals for R&S NGL200 Series

Brands by name

Popular brands