manualshive.com logo in svg

Rohde & Schwarz R&S NGL200 Series, User Manual

The Rohde & Schwarz R&S NGL200 Series user manual is available for free download from manualshive.com. This comprehensive manual provides detailed instructions and guidance on optimizing the performance of your NGL200 Series product, ensuring a seamless user experience. Simplify your setup and operation with this essential manual at your fingertips.

Share
Download
background image

Instrument Functions

R&S

®

NGL200/NGM200

68

User Manual 1178.8736.02 ─ 09

4. Activates the "Enabled" menu item.

The R&S

 

NGL/NGM enables the Arbitrary function and displays the "Arbitrary" icon

on the selected channel status bar information.

5. Select "Load from file.." to load the arbitrary file.

6. Select the required source and file location.

Alternatively, select "New file" to edit a new arbitrary file. The R&S

 

NGL/NGM

opens the 

arbitrary editor dialog

 to edit the arbitrary file.

7. Select "Load" to load the selected file.

The R&S

 

NGL/NGM loads the selected arbitrary file.

8. Applicable only with R&S NGL-K103 or R&S NGM-K103, Digital Output option.

See 

Chapter 6.6, "Trigger / Digital I/O"

, 

on page 62.

Activate "Start triggered" or "Step triggered" if the arbitrary function is executed
under triggered condition.

● "Start triggered": If triggered, the complete arbitrary function is executed.
● "Step triggered": If triggered, every arbitrary step needs a trigger signal to exe-

cute (step time from "Arb Editor" is ignored).

Arbitrary editor

Interpolation flag

After execution of all repetition cycles, the last interpolation flag is ignored. See 

Fig-

ure 6-22

.

The "Arb Editor" dialog allows you to edit the arbitrary profile ("Voltage", "Current",
"Time", "Interpolate" status, "Rep." and "End Behavior"). To view or open the list of
available arbitrary files, select   to open the arbitrary file.

Advanced Features

Summary of Contents for R&S NGL200 Series










































































































































































































Reviews:

No comments

Related manuals for R&S NGL200 Series

RAMSET T2 Operator'S Safety & Operating Instruction Manual preview
T2
Brand: RAMSET Pages: 16
Nation Flooring Equipment 6280 series Quick Start Manual preview
6280 series
Brand: Nation Flooring Equipment Pages: 2
Narex ASV 12 EA Instructions For Use Manual preview
ASV 12 EA
Brand: Narex Pages: 16
NARGESA C2006 Instruction Book preview
C2006
Brand: NARGESA Pages: 71
Ofs Mya Assembly Instructions preview
Mya
Brand: Ofs Pages: 3
Parkside RAPIDFIRE Translation Of The Original Instructions preview
RAPIDFIRE
Brand: Parkside Pages: 64
Avdel 7539-300X Series Instruction Manual preview
7539-300X Series
Brand: Avdel Pages: 47
Kyocera TJEP KA 4060 GAS 3G Quick Start Manual preview
TJEP KA 4060 GAS 3G
Brand: Kyocera Pages: 8
M-PT MV-RAD User Manual preview
MV-RAD
Brand: M-PT Pages: 19
Gude OP 12 Translation Of Original Operating Instructions preview
OP 12
Brand: Gude Pages: 20
TekPower TP-3003D User Manual preview
TP-3003D
Brand: TekPower Pages: 4
Dow GREAT STUFF PRO 13 Installation Information preview
GREAT STUFF PRO 13
Brand: Dow Pages: 4
Rapid Airtac PBS121 Operating Instructions Manual preview
Airtac PBS121
Brand: Rapid Pages: 87
Central Machinery 38144 Assembly And Operating Instructions Manual preview
38144
Brand: Central Machinery Pages: 15
Stanley BOSTITCH PROFESSIONAL QuietSharp Glow EPS11HC Instruction Manual preview
BOSTITCH PROFESSIONAL QuietSharp Glow EPS11HC
Brand: Stanley Pages: 2
Geberit ECO 203 Operation Manual preview
ECO 203
Brand: Geberit Pages: 152
Struers LaboPress-3 Instruction Manual preview
LaboPress-3
Brand: Struers Pages: 112
J. Schneider Elektrotechnik AKKUTEC 2440-0 Quick Strat preview
AKKUTEC 2440-0
Brand: J. Schneider Elektrotechnik Pages: 2

Brands by name

Popular brands

Load more brands