manualshive.com logo in svg

Rohde & Schwarz R&S NGL200 Series, User Manual

Share
Download
Rohde & Schwarz R&S NGL200 Series User Manual Download Page 40

Operating Basics

R&S

®

NGL200/NGM200

38

User Manual 1178.8736.02 ─ 09

The R&S

 

NGL/NGM displays the home window.

2. Select the "Settings" button on the required channel display area.

Alternatively, press [Settings] key.

3. Select the "Device" tab to access the device menu.

Figure 5-9: Device menu

Menu

Description

"Graphical View"

Graphical display of available data source (e.g. voltage, cur-
rent, etc.)

"Arb Editor"

Programs the waveform of voltage and current settings for the
channel output.

"Battery Model Editor"

Available only with option R&S NGM-K106.

Edit new or existing battery model data.

"Logging"

Data logging on the instrument timestamp, voltage, current
and power.

"FastLog"

Available only with R&S NGM power supply series.

Fast data logging on the instrument timestamp, voltage and
current.

"Trigger"

Activates the trigger source for SCPI command (*TRG).

"Digital Output"

Available only with option R&S NGL-K103 or R&S NGM-K103.

Configures the output fault, output 1 and output 2.

"File Manager"

File transfer function between instrument internal memory and
USB stick.

"Interfaces"

Wireless LAN is available only with option R&S NGL-K102 or
R&S NGM-K102.

IEEE-488 (GPIB) interface is available only with option R&S
NGL-K105 or R&S NGM-K105.

Configures the network (WLAN, Wireless LAN), USB interface
and GPIB address

Front Panel Keys

Summary of Contents for R&S NGL200 Series










































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands