R&S FSU
Firmware Release 4.61 SP3
29
E-33
:SENSe<1|2>:FILTer:CCIR:WEIGhted[:STATe]
ON | OFF
This command activates/deactivates the CCIR weighted filter. The filter is active in the following
demodulation bandwidth range:
100 kHz
b
demodulation bandwidth
b
3 MHz
Example:
"SENS:FILT:CCIR:WEIG ON"
’ activates the weighted CCIR filter
Characteristics:
*RST-Wert:
OFF
SCPI:
device-specific
The numeric suffix <1|2> is irrelevant with this command.
R&S FS-K8 Extensions
The additional Enhanced Data Rate functions are described in a new revision of the operating manual.
Operating Manual "Application Firmware for Bluetooth Measurements R&S FS-K8":
•
1157.2597.41-03 (English).
and
•
1157.2597.42-03 (German)
The corresponding PDF-Files are separately available on the service board.
Last minute changes to the R&S FS-K8 operating manual
None.
