R&S FSU
Firmware Release 4.61 SP3
15
E-33
105. (V4.51) Trace Export: Additional ASCII File entries "Preamplifier" and "Transducer"
106. (V4.51) HP emulation: New command "SER?" available to query the serial number
107. (V4.51) New "Instrument Driver Actuator" in the Windows Start menu
108. (V4.51) FSU-B21: User Band Harmonic Numbers up to 100 supported.
109. (V4.51) FSU-B21: Import of conversion loss tables from USB stick supported.
110. (V4.51) FS-K8: EDR Spuriuos: Remote Control read access allowed for Span, Start- and Stop
Frequency.
111. (V4.51) Gated Statistics Measurement: Additional settings checks added (e.g. if the period time
does not fit to the I/Q capture length).
112. (V4.51) LXI Class C Support is now integral part of the base system firmware.
113. (V4.61) Auto Login Password for user INSTRUMENT is changed to "894129" for security
reasons.
114. (V4.61) CONFIGURE NETWORK: An error message pops up if no LAN cable is connected.
"NOT CONNECTED" is now visible.
115. (V4.61) Support for Noise Correction outside of ACP measurement .
116. (V4.61) Multi Carrier ACP: Number of TX channels increased from 12 to 18.
117. (V4.61) Multi Carrier ACP: Support for save/recall of user defined standards.
118. (V4.61) SEM measurement: Supports for save/recall of user defined standards.
119. (V4.61) SEM Measurement: Required Number of Sweep Points is not set.
The follow configuration for EUTRA/LTE Uplink needs 30001 sweep points to be set.
- BW_01_4_MHz.xml
- BW_03_0_MHz.xml
- BW_05_0_MHz.xml
The number of sweep points is no automatically adjusted to this value.
Note:
The number of sweep points is not set to it's previous value if the SEM measurement is
switched off or another SEM standard file is loaded.
120. (V4.61) SEM measurement: Ref Level dialog available to adjust the sweep list's level settings.
121. (V4.61) SEM measurement: Additional WIMAX configuration files available for DL ETSI
(5MHz / 10MHz).
122. (V4.61) Extended Marker Peak List function including automatic peak list update.
123. (V4.61) HP emulation: new commands available
-
Command SYSTem:REVision[:STRing] <new REV? response> to modify the response for
the remote command REV?
-
Command SYSTem:REVision:FACTory to select the default response for the remote
command REV?
-
Plotter commands PA, PD and PU
124. (V4.61) FS-K7: New Fundamental Frequency AUTO/MANUAL setting for SINAD and THD
measurement.
125. (V4.61) FS-K9: Indication of the power meter's serial number.
126. (V4.61 SP1) Support for new board revisions of Wideband Detector Unit (option FSU-B73).
The presence of these boards can be checked by pressing
SETUP – SYSTEM INFO –
HARDWARE
. A certain bit of the hardware code, listed in column
HWC
indicates the new
board revision:
WBDET (Wideband Detector Board)
with HWC Bit 2 = 1
*)
*)
HWC value divided by 4 is odd.
