R&S FSU
Firmware Release 4.61 SP3
14
E-33
84. (V4.41) Additional overload indication OVTRC is available.
85. (V4.41) FSU67 allows 70 GHz Full Span.
86. (V4.41) TRAC:IQ sub system: New remote command TRAC:IQ:DATA:FORMAT.
87. (V4.41) Auto Login Password changed for user instrument to "123456".
It is now possible to enter the password after remote desktop connection by the front panel.
88. (V4.41) General Setup: Baudrate 19200 for the serial COM interface is now selectable.
89. (V4.41) Harmonic Measurement: Additional remote command to get the used resolution
bandwidth settings:
CALCulate1:MARKer1:FUNCtion:HARMonics:BANDwidth[:LIST]?
90. (V4.49) FS-K9: Support for Power Sensors NRP-Z56, NRP-Z57 and NRP-Z92.
91. (V4.41) FSP-B10: Support for SMBV100a, SMA100a and SMB (TTL mode).
92. (V4.41) Support for FS-K73+.
93. (V4.41) HP emulation
-
command OL expanded
-
no difference between local and remote sweep points
94. (V4.41) HP emulation for 8560E, 8561E, 8562E, 8563E, 8564E, 8565E
-
Spurious Measurement: threshold line is take into account for calculating of resolution
bandwidth and noise level, message box “RBW/VBW coupling adjusted” suppressed
-
Harmonic Measurement: modified algorithm for finding harmonics
-
Phase Noise Measurement: some minor adjustments
-
Support of 4 markers
-
Corrections of RBW calculation if FFT-Filter is switched on
-
Command MKNOISE, MKTRACK: correction of return value
-
Sweep time adjusted for gated sweep (command GATE)
95. (V4.41) HP emulation for 8566A/B, 8568A/B
-
Support of 4 markers
96. (V4.41) HP emulation for 8591E, 8594E
-
sweep time adjusted for gated sweep (command GATE)
97. (V4.41 SP1) Support for new option FS-K110 TETRA II
(requires option FSU-B73)
.
98. (V4.51) New functions to temporary disable/enable option license keys.
99. (V4.51) New remote command "
SYSTem:SHUTdown
" to shutdown the instrument.
100. (V4.51) New Status Bit for Overload Trace (OVTRC) in the STATus:QUEStionable:POWer
Register.
101. (V4.51) New function EXPORT/IMPORT DEV DATA to export and import device specific data
(e.g. option licence keys).
102. (V4.51) ACP/Multi Carrier ACP with selectable Weighting Filter for TX, ACP and ALT channels
supported.
Since version 4.5x the following remote commands to not ignore the numeric suffix at CHAN or
ALT accordingly.
SENS:POW:ACH:FILT:STAT:CHAN<1 to 12>
SENS:POW:ACH:FILT:STAT:ALT<1 to 11>
SENS:POW:ACH:FILT:ALPH:CHAN<1 to 12>
SENS:POW:ACH:FILT:ALPH:ALT<1 to 11>
103. (V4.51) Occupied
Bandwidth
measurement:
New command ":CALC:MARK:FUNC:POW:RES?
AOB | AOBW" returns the position and
level of marker T1 and T2.
104. (V4.51) Transducer: New function VIEW TRANSDUCER available
