R&S FSU
Firmware Release 4.61 SP3
13
E-33
60. (V4.21 SP1) For local lockout the alias remote command SYSTem:KLOCk ON | OFF is provided.
61. (V4.31) International keyboard driver package supported (German, Spanish, French, Italian and
Portuguese).
62. (V4.31) New dialogs available for file/path selection (e.g. for Trace Export, Firmware Update
Path).
63. (V4.31) ACP: Extended upper limits for Channel Bandwidth (5GHz) and Channel Spacing
(20GHz).
64. (V4.31) ACP: Overlapping Adjacent Channels allowed now for parallel measurements.
It is now possible to configure overlapping adjacent channels. Based on a common carrier channel setting, it
is now possible to measure with two slitely different ADJ channel settings with one measurement.
Example:
TX Channel / TX Bandwidth (common for both measurement A and B)
ADJ used for measurement A
ALT1 used for measurement A
ALT2 used as ADJ for measurement B
ALT3 used as ALT1 for measurement B
65. (V4.31) ACP: Result output format changed for number of ADJ channels > 3.
66. (V4.31) Additional soft keys are available to change the LAN configuration.
67. (V4.31) Save dialog reports a warning, if no item to save is selected.
68. (V4.31) The increment behaviour of the step keys for parameter SWEEP POINTS is changed.
The behaviour of the knob wheel still has the highest possible resolution.
69. (V4.31) Dummy Video Bandwidt 0 Hz returned for active FFT filter.
70. (V4.31) Availability changed for Spurious Measurement.
The Spurious Measurement is not available if the ACP measurement is active.
71. (V4.31) HP emulation: Additional remote commands are supported.
The following commands are supported: ML, MEAS, SUM, LIMIPURGE, EDITLIML, LIMIREL, SDEL,
SADD, LIMF, LIMU, LIML, LIMM, LIMD, LIMTFL, LIMTSL, SDON, EDITDONE, LIMISAV, LIMIRCL,
LIMITEST, LIMIFAIL
72. (V4.31) HP emulation: A new softkey COUPLING FSP/HP is now available to change the
Span/RBW and RBW/VBW default coupling.
73. (V4.31) HP emulation: The default for Sweep Repeate is now OFF for
856x and 859x
.
74. (V4.31) FSU-B9: The number of sweep points allowed in analyzer mode is now supported in
NETWORK mode, too.
75. (V4.31) FS-K7: Deemphasis is now additionally supported for active Weighting AF Filter CCTTT
and CCIR.
76. (V4.31) Support added for new option VOR/ILS Avionics Measurements Application R&S FS-K15.
77. (V4.31) Support added for new option 3GPP HSPA+ Application Firmware R&S FS-K74+.
78. (V4.31) Application Setup Recovery restores previous settings after application exit.
79. (V4.41) Configurable Spectrum Emission Mask measurement is available in analyzer mode.
80. (V4.41) ACP measurement: User definable standards available.
81. (V4.41) ACP measurement: New standards for E-UTRA / LTE.
82. (V4.41) External Reference: Selectable PLL bandwidth and new ”Fall Back to Internal” mode
EXT [INT].
83. (V4.41) TOI Measurement: New TOI marker search function added (TOI MKR CALC/SRCH).
