R&S FSH
Basic Safety Instructions
1175.6590.12 - 02
Page iv
11. Use suitable overvoltage protection to ensure that no overvoltage (such as that
caused by a bolt of lightning) can reach the product. Otherwise, the person
operating the product will be exposed to the danger of an electric shock.
12. Any object that is not designed to be placed in the openings of the housing must
not be used for this purpose. Doing so can cause short circuits inside the product
and/or electric shocks, fire or injuries.
13. Unless specified otherwise, products are not liquid-proof (see also section
"Operating states and operating positions", item 1. Therefore, the equipment must
be protected against penetration by liquids. If the necessary precautions are not
taken, the user may suffer electric shock or the product itself may be damaged,
which can also lead to personal injury.
14. Prior to cleaning the product, disconnect it completely from the power supply (e.g.
AC supply network or battery). Use a soft, non-linting cloth to clean the product.
Never use chemical cleaning agents such as alcohol, acetone or diluents for
cellulose lacquers.
Operation
1. Operating the products requires special training and intense concentration. Make
sure that persons who use the products are physically, mentally and emotionally fit
enough to do so; otherwise, injuries or material damage may occur. It is the
responsibility of the employer/operator to select suitable personnel for operating
the products.
2. Before you move or transport the product, read and observe the section titled
"Transport".
3. As with all industrially manufactured goods, the use of substances that induce an
allergic reaction (allergens) such as nickel cannot be generally excluded. If you
develop an allergic reaction (such as a skin rash, frequent sneezing, red eyes or
respiratory difficulties) when using a Rohde & Schwarz product, consult a
physician immediately to determine the cause and to prevent health problems or
stress.
4. Before you start processing the product mechanically and/or thermally, or before
you take it apart, be sure to read and pay special attention to the section titled
"Waste disposal", item 1.
5. Depending on the function, certain products such as RF radio equipment can
produce an elevated level of electromagnetic radiation. Considering that unborn
babies require increased protection, pregnant women must be protected by
appropriate measures. Persons with pacemakers may also be exposed to risks
from electromagnetic radiation. The employer/operator must evaluate workplaces
where there is a special risk of exposure to radiation and, if necessary, take
measures to avert the potential danger.
6. Should a fire occur, the product may release hazardous substances (gases, fluids,
etc.) that can cause health problems. Therefore, suitable measures must be taken,
e.g. protective masks and protective clothing must be worn.
