Rohde & Schwarz FSH13 Operating Manual Download Page 134

Page: 134 / 380

R&S FSH

Spectrum Analyzer Mode

Configuring Spectrum Measurements

Operating Manual 1173.6275.12 - 30

119

3.2.6.6 Removing Markers

Remove markers any time you want.

Removing selected markers

► Select the marker you want to delete with the "Select Marker" softkey.

The corresponding marker symbol turns red and the marker input field opens.

► Press the MARKER key.

► Press the "Delete Marker" softkey.

► Select the "Delete Selected" menu item.

► Confirm the selection with the ENTER key.

The R&S FSH deletes the marker.

Deactivating markers

If you delete marker 1 (M1), all delta markers that are relative to that marker are also
deleted.

Removing delta markers only

► Press the MARKER key.

► Press the "Delete Marker" softkey.

► Select the "Delete All Delta" menu item.

► Confirm the selection with the ENTER key.

The R&S FSH deletes all delta markers.

Removing all markers at the same time.

► Press the MARKER key.

► Press the "Delete Marker" softkey.

► Select the "Delete All" menu item.

► Confirm the selection with the ENTER key.

The R&S FSH deletes all markers and delta markers.

Summary of Contents for FSH13





























































































































































































































































































































































































Search results

Summary of Contents for FSH13

Reviews:

Brands by name

Popular brands

Rohde & Schwarz FSH13, Operating Manual

Search results

Summary of Contents for FSH13

Reviews:

Brands by name

Popular brands