PR821-CH User Manual.doc
2018-04-05
17/29
Table 4 contains selected output functions of PR821-CH controller and remaining ones are
described in the manual Functional description of PRxx1 series controllers.
Table 4. Output functions of PR821-CH controller
No.
Function
Description
[41]
AIR CONDITION
The output represents the state of AIR CONDITION flag.
[42]
DO NOT DISTURB
The output represents the state of DO NOT DISTURB flag.
[43]
CARD IN HOLDER
The output represents the state of CARD IN HOLDER flag.
[44]
CHECK-IN STATUS
The output represents the state of CHECK-IN STATUS flag.
[45]
MAKE UP ROOM
The output represents the state of MAKE UP ROOM flag.
[46]
ASSISTANCE
The output represents the state of ASSISTANCE flag.
[47]
SERVICE
IN
PROGRESS
The output represents the state of SERVICE IN PROGRESS
flag.
[48]
POWER SUPPLY
The output represents the state of POWER SUPPLY flag.
[49]
WINDOW STATUS
The output represents the state of WINDOW STATUS flag.
[50]
GUEST BLOCKING
The output represents the state of GUEST BLOCKING flag.
[51]
FLAG 1
The output represents the state of FLAG 1 flag.
[52]
FLAG 2
The output represents the state of FLAG 2 flag.
[53]
FLAG 3
The output represents the state of FLAG 3 flag.
[54]
FLAG 4
The output represents the state of FLAG 4 flag.
[55]
FLAG 5
The output represents the state of FLAG 5 flag.
[56]
FLAG 6
The output represents the state of FLAG 6 flag.
[57]
FLAG 7
The output represents the state of FLAG 7 flag.
6.3 Function cards
Function cards are proximity cards programmed with particular function. Functions cards can be
defined with PR Master software in properties of controller in the tab
Function cards
. The same
function can be assigned to multiple cards but single card can be assigned with single function.
Except for typical function cards recognized by PRxx1 series controllers, the PR821-CH can
additionally operate with following functions:
[FP26]:Toggle AIR CONDITION
[FP27]:Toggle DO NOT DISTURB
[FP28]:Toggle ASSISTANCE
[FP29]:Toggle MAKE UP ROOM
[FP30]:Toggle GUEST BLOCKING
[FP32]:Toggle FLAG 1
[FP33]:Toggle FLAG 2
[FP34]:Toggle FLAG 3
[FP35]:Toggle FLAG 4
[FP36]:Toggle FLAG 5
[FP37]:Toggle FLAG 6
[FP38]:Toggle FLAG 7
[FP39]:Toggle FLAG 8
Note: Function cards are recognized only at Terminal ID0 i.e. external reader connected to the
controller.
