Rodenstock Phoromat 2000, Operation Manual

Page: 88 / 233

Phoromat 2000 Operation Manual
- 80 -
5.3 Replacing Fuses
When the Phoromat 2000 does not normally turn on, the fuses may be blown.
Replace them with the spare fuses provided.
When the Phoromat 2000 is connected to the system table, the junction box is in the
system
table. Replace
the fuses of the system table according to the system table operator’s
manual.
WARNING
Be sure to turn off and disconnect the power cord from the outlet
before replacing the fuses. Otherwise, it may result in fire or electric
shock. If the fuses often blows, contact your authorized distributor.
WARNING
Only the specified fuses must be used.
Rating: 250V T3.15A
1. Turn off the power.
2. Remove the power cord from the electrical outlet of the junction box.
3. Replace fuses.
1) Fuse holder in the direction of the arrow
to pull it out.
2) Replace the fuses and reset the fuse holder in its original position.