Rodenstock Phoromat 2000, Operation Manual

Page: 227 / 233

２０
8. Change the channel of remote controller
①
②
③
④
⑤
⑥
8.1. Basic Setup
⚫ There is “A~E” channels on the remote control and on the time of delivery, the entire
channel is set on channel “A”
8.2. The method to check a channel between the remote
control and a machine
⚫
(Regardless of a channel which is set on remote control or a machine) if a machine
recognize
s a signal of “
①
” which a user presses 3 times continually, the machine shows
the channel of the remote control to the user through the blinking LED on the bottom.
(A = 1, B = 2, C= 3, D = 4, E = 5)
⚫ (Regardless of a channel which is set on remote control or a machine) if a machine
recognizes a signal of “
②
” which a user presses 3 times continually, the machine shows
the channel of the machine to the user through the blinking LED on the bottom.
(A = 1, B = 2, C= 3, D = 4, E = 5)