Rodenstock Phoromat 2000, Operation Manual

Page: 226 / 233

１９
7. Input and Use of Program
7.1. How to input user's program
How to input user's program 1
⚫
When yo
u press “LIGHT” button one time, the lamp will be turn off with "Beep, Beep"
sound.
⚫ When you press “PGM1” button one time, the lamp is on with "Beep, Beep" sound and
“C” chart appears.
⚫
After choosing your preference (not only a single chart but a chart with a mask of
horizontality and perpendicularity, if you press “PROGRAM
▶
” button, you may hear
"Beep, Beep" sound.
⚫
You can repeat above process as many as you want to. (40 programs can be input in
total)
⚫ In case you want to check the previous program while you’re inputting a new one, you
can check the previous one when you p
ress “
◀
PROGRAM”.
⚫
"PGM1" button once, press the "Beep, Beep" you hear the new program will be saved.
Warning - If you do not press the "PGM1" button, the program will not be
saved (If you turn off and turn on, a program will be deleted.).
NOTE
On the time of delivery, the chart is input on user program 1 in accordance
with the chart of remote control.
How to input user’s programs 2
⚫ "How to input user’s program 1" in the "PGM1" button instead of "PGM2" button is used.
On the time of delivery, ther
e is no program on “User program 2”
7.2. How to use your stored programs
⚫ When you press “PGM1” or “PGM2”, the first chart of chosen program appears.
⚫ When you press “PROGRAM
▶
” button, you may move to a next chart.
⚫ When you press “
◀
PROGRAM”, you may move to a previous chart.
⚫ When you chose your preference, “User program call” is finished.
NOTE