388
Rockwell Automation Publication 7000L-UM301F-EN-P - March 2020
Chapter 5
Component Definition and Maintenance
6.
Press
F5
[
CODE
]. The display will change to ‘
Select Code
’ screen as shown
in the picture below.
Figure 322 - Select Code
7.
Enter the parameter linear number (in our example we have entered
569
)
and then press
Enter
key. Once you press the
Enter
key, the parameter
description will appears on the screen as shown in the picture below.
Figure 323 - Parameter Description
8.
Press
Enter
key again. The display will change to the ‘Diagnostics Setup’
screen and the desired parameter gets assigned to
Trace 1
. Now, press the
down arrow key to move the cursor to
Trace 2
and repeat steps 3 – 8 above
to assign a parameter to
Trace 2
.
Figure 324 - Diagnostics Setup with Parameters
