Rockwell Automation Allen-Bradley IntelliVAC 1503VC-BMC5, User Manual

Page: 15 / 46

Rockwell Automation Publication 1503-UM053C-EN-P - March 2015 15
Chapter
3
Installation and Wiring
General Precautions
In addition to the precautions listed throughout this manual, the following
statements, which are general to the system, must be read and understood.
Safety and Codes
Arrangements The IntelliVAC is offered in two arrangements, Integral (part of an Allen-Bradley
Bulletin 1500/1900 MV controller) or as an OEM component.
Integral to an Allen-Bradley MV Controller
The IntelliVAC is available as a primary component of an Allen-Bradley Bulletin
1500/1900 MV controller, see
Figure 4 on page 16 .
ATTENTION: The controller contains ESD (electrostatic discharge) sensitive
parts and assemblies. Static control precautions are required when installing
testing, servicing, or repairing the assembly. Component damage may result if
ESD control procedures are not followed. If you are not familiar with static
control procedures, see applicable ESD protection handbooks.
ATTENTION: An incorrectly applied or installed controller can damage
components or reduce product life. Wiring or application errors, such as
incorrect or inadequate AC supply, or excessive ambient temperatures, may
result in malfunction of the system.
ATTENTION: Only personnel familiar with the controller and associated
machinery should plan or implement the installation, start-up, and subsequent
maintenance of the system. Failure to do this may result in personal injury and/
or equipment damage.
ATTENTION: The Canadian Electrical Code (CEC), National Electrical Code (NEC),
or other local codes outline provisions for safely installing electrical equipment.
Installation MUST comply with specifications regarding wire type, conductor
sizes, branch circuit protection, interlocking and disconnect devices. Failure to
do so may result in personal injury and/or equipment damage.