Rockwell Automation 20G2, Hardware Service

Page: 83 / 196

Rockwell Automation Publication 750-TG101A-EN-P - June 2022 83
Chapter 5 Frame 6 Renewal Kits Installation
Remove the Cover
For IP00, NEMA/UL Open Type, IP21, NEMA/UL Type 1, and flange, NEMA/UL
Type 4X/12 back enclosures, remove the cover to access internal components in
the drive.
Remove the Cover
Follow these steps to remove the cover.
1. Review the Product Advisories on page 11 .
2. Turn off and lock-out incoming power. See Remove Power from the
System on page 12 .
3. Loosen the four M4 x 8 mm captive screws that secure the cover to the
assembly, and remove the cover.
Install the Cover
Install the cover in the reverse order of removal.
3
M4 x 8 mm
F - 6.4 mm (0.25 in.) or 4 mm hex
2.6 N
•
m (23 lb
•
in)
=