Rockwell Automation 1734-8CFGDLX, User Manual

Page: 18 / 112

Publication 1734-UM015A-EN-E - November 2009
16 Install POINT I/O DeviceLogix Modules
ATTENTION
POINT I/O is grounded through the DIN rail to chassis ground.
Use zinc-plated, yellow-chromated steel DIN rail to assure proper
grounding. The use of DIN rail materials (for example, aluminum
or plastic) that can corrode, oxidize, or are poor conductors, can
result in improper or intermittent grounding.
Secure DIN rail to mounting surface approximately every 200
mm (7.8 in.).
WARNING
EXPLOSION HAZARD
•
Do not disconnect equipment unless power has been
removed or the area is known to be nonhazardous.
•
Do not disconnect connections to this equipment unless
power has been removed or the area is known to be
nonhazardous. Secure any external connections that mate to
this equipment by using screws, sliding latches, threaded
connectors, or other means provided with this product.
•
Substitution of components may impair suitability for Class I,
Division 2.
•
If this product contains batteries, they must only be changed
in an area known to be nonhazardous.
ATTENTION
Prevent Electrostatic Discharge
This equipment is sensitive to electrostatic discharge, which can
cause internal damage and affect normal operation. Follow these
guidelines when you handle this equipment:
•
Touch a grounded object to discharge potential static.
•
Wear an approved grounding wriststrap.
•
Do not touch connectors or pins on component boards.
•
Do not touch circuit components inside the equipment.
•
Use a static-safe workstation, if available.
•
Store the equipment in appropriate static-safe packaging when
not in use.