5
Use a Schrader valve tool to install a new Schrader valve
into the air fill valve.
6
Open the seatpost clamp or loosen the seatpost collar binder bolt
and remove the Reverb Stealth from the bicycle. It is not necessary
to remove the Reverb remote from the handlebar unless the
remote housing is too short to allow the Reverb to be removed
from the frame.
N OT I C E
Use aluminum soft jaws to prevent damage to the seatpost or any seatpost components when clamping into a vise. Clamp the shaft
only tight enough to prevent it from spinning in the soft jaws.
7
Clamp the post head into a vise with soft jaws.
Standard
: Use a 7 mm and a 10 mm open end wrench to
disconnect the hose from the poppet cover.
Connectamajig
: Hold the Connectamajig coupler on the wrench
flats with a 9 mm wrench. Use a 6 mm wrench on the crimped
fitting on the hose. Unscrew the coupler from the crimped fitting
to disconnect.
8
Use internal snap ring pliers to remove the snap ring from the
bottom of the lower post.
7 mm
10 mm
Standard
6 mm
Connectamajig
9 mm
9
REVERB STEALTH DISASSEMBLY
