21
Point the shaft at an oil pan and slowly push the inner shaft into
the upper post. Oil will eject out of the center of the inner shaft.
Leave the inner shaft in the upper post. Leave a small amount of
inner shaft exposed.
C AU T I O N - E Y E H A Z A R D
Fluid will be ejected from the center of the inner shaft. Wear safety
glasses.
22
Clamp the post head in a vise with soft jaws.
23
Use a 23 mm box end wrench to unthread the inner seal head from
the bottom of the upper post.
N OT I C E
To prevent damage to the internal seal head wrench flats, make
sure the wrench is firmly tightened against the wrench flats while
unthreading the seal head from the upper post. Be careful not to
scratch the inner shaft as this is a critical sealing surface.
24
Remove the inner seal head from the upper post by hand.
23 mm
13
REVERB STEALTH DISASSEMBLY
