4
Fill one Reverb bleed syringe 3/4 full with Reverb fluid. Hold the
syringe upright, cover the tip with a rag, and gently depress the
plunger to purge any air bubbles from the syringe.
N OT I C E
Only use the syringes that come with the Reverb Stealth Bleed Kit.
Do not use any syringe that has been in contact with DOT fluid.
5
Use a T10 TORx
®
to remove the bleed screw from the remote.
Install the fluid filled syringe into the bleed port.
6
Use a T10 TORx
®
to remove the bleed screw from the bottom of
the seatpost, then install the empty syringe into the bleed port.
7
Depress the remote syringe plunger while pulling out on the
seatpost syringe plunger. Depress the plunger of the syringe
attached to the seatpost while pulling out on the remote syringe
plunger.
Repeat these steps several times until bubbles stop coming out of
the system and into the syringes.
8
Disconnect the syringe from the seatpost bleed port. Use a
T10 TORx
®
to reinstall the bleed screw and tighten to
1.1-2.2 N•m (10-20 in-lb).
T10
T10
T10
1.1-2.2 N•m (10-20 in-lb)
28
REMOTE AND HOSE BLEED
