57
IFP and Damper Body Service
2 0 0 H o u r S e r v i c e
I F P a n d D a m p e r B o d y S e r v i c e
Wrap a shop towel around the end of the damper body.
Wrap a shop towel around the end of the damper body.
Thread the rear shock air valve adapter tool into a shock pump. Thread
Thread the rear shock air valve adapter tool into a shock pump. Thread
the air valve adapter into the air fill port in the damper body.
the air valve adapter into the air fill port in the damper body.
Pump air into the damper body until the IFP is forced out of the damper
Pump air into the damper body until the IFP is forced out of the damper
body, and into the shop towel.
body, and into the shop towel.
Unthread the air valve adapter and pump from the damper body.
Unthread the air valve adapter and pump from the damper body.
Spray RockShox Suspension Cleaner inside and outside of the damper
Spray RockShox Suspension Cleaner inside and outside of the damper
body.
body.
Place the damper body vertically onto a shop towel and allow the
Place the damper body vertically onto a shop towel and allow the
excess oil and cleaner to drain.
excess oil and cleaner to drain.
Remove and discard the IFP o-ring.
Remove and discard the IFP o-ring.
Clean the IFP.
Clean the IFP.
Apply grease to a new IFP o-ring and install it onto the IFP.
Apply grease to a new IFP o-ring and install it onto the IFP.
Loosen the air valve core in the damper body to allow air pressure to
Loosen the air valve core in the damper body to allow air pressure to
escape when the IFP is installed. Do not remove the air valve.
escape when the IFP is installed. Do not remove the air valve.
1
Shock pump
Air valve adapter
2
RockShox Suspension Cleaner
3
Grease
4
Schrader valve tool
