Robotiq FT-150/300 Sensor
Instruction Manual
Robotiq inc. © 2016
14
Figure 3.3.2 : Attaching the FT 300 sensor to a robot arm using the mandatory coupling.
3.4 Power supply specifications
The Sensor needs to be supplied by a DC voltage source. This power supply is not included with the Sensor.
POWER SUPPLY
SPECIFICATIONS
FT-150
FT-300
Output voltage
6 to 24 V DC
5 to 24 V DC
Max power consumption
2 W
2 W
Overcurrent
1 A Fuse
(Phoenix #0916604 (UT6-TMC M 1A))
Overvoltage protection
Warning
Maximum output voltage tolerance is 10%, exceeding
this limit, 26.4 V DC could damage the Sensor.
Info
Robotiq recommends the use of the following power supply :
TDK-Lambda DPP Series, 15W Single Output DIN Rail Mount Power Supply, DPP15-24
