ORBIT 16
Phase 5
‒
After the “Reinforcement turns” count
has finished, the rotating ring stops and
the pad
(A)
moves up, locking the film
against the stopper
(C)
.
If there is a sealing unit installed, the
coating gets sealed as the pad moves
up.
The gripper returns to its position and
locks the coating.
‒
The blade comes out and cuts the
coating.
‒
The pad
(A)
lowers into rest position and
the blade is withdrawn at the same time.
‒
The outfeed conveyor restarts.
‒
The product detects the photocell
(B2)
,
the outfeed pressure unit lifts up and the
“conveyor outfeed” timer starts.
‒
When timer has finished counting, the
conveyor stops and the products totally
wrapped can be removed from the
machine.
23/95
