ORBIT 16
When wrapping very wide products, guide
supports must be moved after having loosened
the handles
(B)
.
5.3. PRESSURE UNIT
ADJUSTMENT
Height position
When processing round and high
products, move the pressure units in top
position:
1.
Disassemble the support by removing
screws
(B)
.
2.
Put them back in the desired position
using the special holes and
(B)
screws.
i
Caution - Warning
Between top pressure units and product
there must always be space.
When in bottom position, the pressure
units must not touch the conveyor but
must keep a distance of
10/15 mm
.
Check the position by operating the
corresponding solenoid valve manually
with a screwdriver lo lower the pressure.
|
Important
See the wiring diagram to identify the
solenoid valve to operate.
50/95
