ORBIT 16
Phase 2
‒
Infeed/outfeed conveyors starts.
‒
The product moves forward and engages
photocell
(B2)
.
‒
The outfeed pressure platen lowers on
the product.
Phase 3
‒
The "central bands" timer starts
counting; at count completed, the
conveyor stops, the rotating ring starts
and counts the "reinforcing revolutions"
set; the product is wrapped for the
number of reinforcing revolutions set.
|
Note
The number of central bands is
determined by the "Central bands" timer,
the speed of the carriers and the length
of the product.
Phase 4
‒
The product moves forward disengaging
photocell
(B1)
, the infeed pressure
platen lifts and the ring starts rotation.
‒
After one revolution, conveyors turn on
and the “tail positioning” timer begins
counting.
‒
After the timer count has finished, the
outfeed carrier stops, the “head and tail
turns” counter starts; the tail of the
product is wrapped and gripper comes
out at the last turn of the rotating ring to
grasp the coating.
|
Important
In case of
500
reel, the machine carries
out an additional pneumatic movement
to lock the coating inside the gripper in
the forward most position.
25/95