ORBIT 16
Phase 3
‒
The "additional bands" timer starts
counting; at count completed, the carrier
stops, the rotating ring starts and counts
the "reinforcement turns" set; the
product is wrapped with the number of
reinforcement turns set.
‒
At the last wrap of the rotating ring, the
clamp comes out to hook the film.
‒
The rotating ring stops and the pad
(A)
moves up to lock the coating against the
stopper
(C)
.
If there is a sealing unit installed, the
coating gets sealed as the pad moves
up.
The gripper returns to its position and
locks the coating.
‒
The blade comes out and cuts the
coating.
‒
The pad
(A)
lowers into rest position and
the blade is withdrawn at the same time.
|
Note
The number of “additional bands” and
the distance between them are
determined by the parameters set by the
user from the main screen of the
operating terminal.
|
Important
In case of
500
reel, the machine carries out an additional pneumatic movement to lock the coating inside the
gripper in the forward most position.
Phase 4
‒
As it moves forward, the product
uncovers the photocell
(B1)
; the inlet
pressure roller moves up.
‒
The outfeed conveyor restarts.
‒
The product detects the photocell
(B2),
,
timer begins counting the “conveyor
outfeed”.
‒
After the time count has finished, the
carrier stops and the product can be
picked up from the machine.
28/95
