background image

instructions for

MOTORCYCLE DOLLY REAR WHEEL- LOng 

SIDE STAnD TYPE. 

model no: 

MS064

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAfETY        

1.1.    

maintain the

 

dolly in good condition (use an authorised service agent).

1.2.    

replace or repair damaged parts. 

Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.

1.3.    

locate the dolly in a suitable work area. Keep area clean and tidy and free from unrelated materials, and ensure that there is adequate  

 

lighting. 

1.4.    

ensure that the floor is level and strong enough (preferably concrete) to take the weight of the dolly and the motorcycle. 

 

8

  

DO nOT

 use the dolly on tarmacadam, as the surface may be unstable.

1.5.    

Keep the dolly clean for best and safest performance.

1.6.    

the maximum motorcycle weight is 300kg. 

DO nOT

 exceed this rated capacity.

1.7.    

use appropriate straps to secure the motorcycle to the dolly when manoeuvring.

1.8.    

Pull rather than push the motorcycle when manoeuvring on the dolly to reduce the risk of pushing the motorcycle off its side stand.

1.9.    

maintain correct balance and footing, 

DO nOT

 over reach. ensure the floor is not slippery and wear non-slip shoes. Keep children and  

 

unauthorised persons away from the work area.

 

8

   DO  nOT

 use the dolly for a task it is not designed to perform.

 

8

  

DO nOT

 use the dolly if it is damaged.

 

8

   DO  nOT

 use the dolly when you are tired or under the influence of alcohol, drugs or intoxicating medication.

 

8

  

DO nOT

 allow untrained persons to use the dolly.

 

8

  

DO nOT

 make any modifications to the dolly. 

1.10. 

Before storing in safe area, ensure that all parts are clean and free of grease and oil.

WARNING: The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that may occur. 

It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the 

operator. 

2.  InTRODUCTIOn

motorcycle dolly holds a single motorcycle or sports bike with side stand, weighing up to 300Kg. enabling easy manoeuvrability around the 

workshop or garage. the front wheel stays in contact with the ground allowing the motorcycle to be steered into the desired position. Pivoting 

design allows flexibility in side stand designs.

3.  SPECIfICATIOn

Model no. ...................................................................MS064

max. capacity ..............................................................300Kg

overall dimensions (lxW) .................................1260x555mm

rear Wheel loading tray dimensions ................400x250mm

ms064| issue 1 16/03/16

Original Language Version

© Jack sealey limited

refer to 

instruction 

manual

 fig.1

Reviews: