If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
42
Clock and Alarms
Alarms
Your sound system has an alarm which can be set to wake you to DAB,
FM radio, CD, USB, SD card, iPod or buzzer alarm. The alarm can be
set to sound once, daily, on weekdays or at weekends. In the event of a
power interruption your sound system has a built in memory chip that will
maintain your alarm settings for when the power is restored.
Note:
The alarms can only be set while the unit is in standby mode.
If no buttons are pressed for several seconds, your sound system will
exit the alarm setup.
1. Before setting an alarm ensure that the clock time is set (see
page 49,50).
2. With your sound system in standby mode, press and hold the
Intro
/ Repeat
button
(on remote control) or the
Intro / Repeat / Timer
button on the sound system.
3. Press
the
Tuning Up
or
Down
buttons to choose whether to set the
alarm to On or Off. If Off is selected, the unit will exit the alarm menu.
4. With 'On' selected on the display, press and release the
Select
button.
The
alarm hour digits will
fl
ash on the display.
5. Press
the
Tuning Up
or
Down
buttons to choose the alarm hour and
then press and release the
Select
button to enter the hour setting.
The alarm minute digits will then
fl
ash on the display.
6. Press
the
Tuning Up
or
Down
buttons to choose the alarm minute
and then press and release the
Select
button to enter the minute
setting. The alarm source option will
fl
ash on the display.
2-6
3-6
3-6
1
4-6
