37
Inserting and removing memory devices
1. Ensure your sound system is in standby mode.
2. To insert an SD card into your sound system push the card label side
upward and gold contacts
fi
rst into the card slot on the front of your
sound system until it clicks. To remove the card push the card in so
that it clicks once more. It will then be pushed out slightly allowing
removal.
USB memory devices plug into the rectangular slot on the front of your
sound system.
Using SD cards or USB memory devices
This section describes how to use your sound system to access and
playback your audio
fi
les via USB memory devices and Secure Digital
(SD, SDHC) cards.
Important:
Your sound system is only designed to work with USB memory
fl
ash memory devices. It is not intended to be connected to hard disk drives
or any other type of USB device.
The Sound 70 has been tested with a range of USB memory devices of up
to 32GB capacity and SD cards up to 2GB and SDHC cards up to 32GB
are supported. However, there are many different card variants available
and not all cards can be guaranteed to work in the Sound 70. Memory must
use the FAT or FAT 32
fi
ling system in order to operate in the Sound 70.
Audio formats supported for playback are MP3 and WMA. Playback does
not support
fi
les encoded using WMA lossless, WMA Voice, WMA 10
professional, nor
fi
les of any format which have DRM protection.
SD card and USB slots are located underneath the front panel on your
sound system.
Cautions:
In order to minimise the risk of damage to your sound system, your SD
card or your USB memory, please place the unit such that the device
cannot easily be knocked while it is inserted in the socket.
Remove the USB memory or SD card before carrying the unit or if not
using the USB or SD feature for a prolonged period.
Place the unit in Standby mode before removing your SD card or USB
memory device.
2
2
