9
Connecting loudspeakers
The loudspeakers should be connected using the cables supplied as shown. The two loudspeakers are identical. One loudspeaker should be placed
in front of and to the left of the normal listening position, and the other in front and to the right.
It is important for good bass reproduction and stereo location that both speakers are wired in the same phase with respect to the ampli
fi
er outputs.
This can be done as follows.
Connect the plug of the speaker wire into the socket on the rear of sound system marked
L
for the left hand speaker.
Connect the plug of the speaker wire into the socket on the rear of sound system marked
R
for the right hand speaker.
The placement of the loudspeakers will depend upon the layout of the room. Location is not critical, but do not place them in direct sunlight or over
sources of heat such as radiators. Optimum sound quality will result if they are to be placed slightly away from any corners, and with each loudspeaker
an equal distance from the normal listening position and pointing towards the listener.
USB
AUX IN
L
R
SPEAKER
L
R
