If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
12
DAB Radio
Operating your sound system - DAB
1. Fully extend the wire aerial.
2. If your sound system is in standby mode, press the
On / Off
button
to switch it on.
3. Press and release the
Function
button until the DAB mode is selected.
The display will show 'DAB' and then 'Tuning' for a few seconds.
4. If this is the
fi
rst time the sound system is used a quick scan of UK Band
III DAB channels may be carried out (depending on whether scanning
was already completed in standby mode). If the sound system has
been used before the last used station will be selected.
5. The
fi
rst station in the list of stations found will be played. The display
will show the station name. When the auto tune is complete the
fi
rst
station (in numeric-alpha order 0...9...A....Z) will be selected.
6. If the station list is still empty after the Autotune your radio will display
'No DAB'.
7. If no signals are found it may be necessary to relocate your sound
system to a position giving better reception, and then repeat the scan
using the Auto-tune facility (see Finding new stations on page 14).
Note:
that the radio station name and frequency displays shown in this
user guide may differ from those that you see on your radio. Broadcasters
may change radio station names that are transmitted, and the frequencies
used for DAB and FM radio stations may not be the same in all parts of
the country.
2
3
