HOWTO: Potable Water Use
97
© 2015 by Roadtrek, Inc.
•
• The city water connection by-passes the water pump and fresh water tank. Therefore, the use of these items is not
necessary when connected directly to an external water source. Leave your water pump turned off when connected to city
water.
Attaching pressure regulator to city water
fill location
Hose connected
To disconnect the city water connection:
•
• Turn off the external water source.
•
• Open a faucet to relieve the pressure in the system. Failure to do so will not damage your vehicle, but may result in an
unexpected shower when you disconnect the hose. The galley sink is a handy place to do this.
•
• Remove the hose from the city water connection, and replace the cap on the fill connection.
•
• Disconnect the hose from the supply faucet and stow it inside your vehicle. Connecting the ends is a handy way to prevent
dirt or other contaminants from entering the hose while stored, and residual water from leaking out.
