Sleeping Facilities
22
© 2015 by Roadtrek, Inc.
the power sofa seats without seatbelts while the vehicle is in motion.
Front Seat Beds
The captain seats located at the front of the vehicle can be configured into single bed arrangements with the optional folding
mattresses. Use the following procedure to create one or two single front bed configurations. If you have both folding
mattresses, the short one goes on the driver's side and the longer one goes on the passenger side.
Front captain seat controls
Passenger seats in position for folding
mattress
•
• Lower the front seat base as far as possible. To do this, look on the outboard side of the front seat, and you will see three
knobs.
•
• Turn the front seat base height knob clockwise until the front of the seat base is as low as possible.
•
• Push down on the rear seat base height lever until the back of the seat base is as low as possible.
•
• Use the recline knob to put the seat back in an upright position.
•
• Turn both captain seats around so that they face the aisle, and the seatbacks face the doors. You will have to slide the rear
seat forward before you can swivel it. Slide both seats all the way back in their tracks - as far to the outside as possible.
•
• Push the tab in the mattress between the two seatbacks.
•
• Open the optional folding mattress across the seats.