Roach Conveyors 138LRC, Owner'S Manual

Page: 22 / 24

MODEL 196LRCS
PARTS LIST FOR UNIT WITH END DRIVE / SIDE MOUNT END DRIVE
Specify
Unit Serial Number
when ordering replacement parts to ensure proper allocation of components (See Ordering
Replacement Parts on page 15).
Recommended Spare Parts are shown in red. Charted are item numbers and part descriptions. When
ordering use example below.
Example: Need a replacement 138T tapered roller for 196LRCS
Part No: SN 123456 - 3 - 254T tapered roller
ITEM
#
DESCRIPTION ITEM
#
DESCRIPTION
1 196S roller (shortened for spur) 38 5/16” flange nut
2 196S roller 39 5/16” flat washer
3 254T tapered roller 40 3/8” flange nut
4 Spur assembly (specify 30° or 40°) 41 3/8” flat washer
5 196S grooved roller 42 7/16” lock washer
6 196S pinned roller (shortened for spur) 43 1/2” hex nut
7 Take-up sheave mounting channel 44 1/2” lock washer
8 Splice plate 45 1/2” flange nut
9 Bolt-in butt coupling (left hand) 46 1/8” x 1” cotter pin
10 Bolt-in butt coupling (right hand) 47 1/2” flat washer
11 Pillow block mounting bracket 48 Orange nylon finger guard
12 Take-up rod support angle 49 Black nylon sheave spacer/adaptor
13 Sheave mounting channel 50 V-belt sheave w/1-3/16” bore
14 Flange bearing mount 51 Flat idler sheave
15 Spur mounting bracket 52 Nylon 3” O.D. V-groove take-up sheave
16 32-1/2”/48” IR inside curve channel 45°/60° 53 Steel 4” O.D, V-groove take-up sheave
17 Idler sheave angle 54 V-Belt
18 Outside tangent drive side channel 55 1/8” Dia. x 9-1/2” lg. Drive band
19 Inside tangent side channel 56 Motor
20 Take-up mounting angle 57 Gear reducer
21 32-1/2”/48” IR outside curve channel 45°/60° 58 Drive sprocket
22 Roller mounting clip 59 Gear reducer drive sprocket
23 Drive sheave shaft 60 #50 (thru 1-1/2 HP) or #60 roller chain
24 Tail sheave shaft 61 Chain guard angle mount (not shown)
25 Bed spacer rod 62 Reducer push plate assembly
26 3 hole flange bearing w/1/3/16” bore 63 Underneath motor base plate
27 Pillow block bearing w/1-3/16” bore 64 End Drive Chain Guard Assembly
28 3/8” x 3/4” HHCS
29 3/8” X 1-1/4” HHCS OPTIONAL SIDE MOUNT END DRIVE PARTS LIST
30 3/8” X 1-1/2” HHCS 56 Motor
31 3/8” X 1-3/4” HHCS 57 Gear reducer
32 3/8” X 2-1/4’ HHCS 58 Drive sprocket
33 7/16” X 1” HHCS 59 Gear reducer drive sprocket
34 1/2” X 1-1/2” HHCS 60 #50 (thru 1-1/2 HP) or #60 roller chain
35 1/2” X 6” HHTB 61 Reducer push plate assembly
36 5/16” X 3/4” carriage bolt 62 Side mount motor base plate
37 3/8” X 3/4” carriage bolt 63 Side mount chain guard assembly
22