6. Quick Start (MADI)
Follow this procedure to send microphone input signals to the digital outputs.
1. Load
Preset 1
from the
STATE
>Preset tab. If
Preset 1 has been modified, load the Factory
preset and create a routing first Section 10.1,
“Routing Signals to the Outputs”.
2. In the
CLOCK
section, choose a sample rate
and verify that the device is clock master or that
the chosen clock source is in sync.
3. After connecting an analog signal, adjust its
gain level as needed: press the button next to the
input.
4. Then, use the buttons and encoder next to the
display to adjust settings as needed.
done! The channel is sent to the ADAT, MADI and AVB outputs.
RME 12Mic User’s Guide
23
| 6. Quick Start (MADI)
